6 inch SDR35 PVC to Dual 4 inch Flex Hose Dust Collection Y Splitter Adapter (3D Printed PETG)

Description

If you have dust collection in your shop you probably use a lot of flex hose.  Finding adapters to convert between different sizes of flex hose can be difficult, especially for a 6 inch splitter!  That lead me to create this 6 inch SDR35 PVC to dual 4 inch flex hose 3D printed adapter.

This adapter is made to convert 6 Inch SDR35 PVC sewer drain pipe to dual 4 inch flex hose.  The adapter is printed in strong PETG and are easily connected.

Connecting the PVC End

For a non permanent connection, I recommend using foil tape.  It holds really well, is cheap and can easily be removed if you need to adjust your system.  For a permanent connection, I recommend a thick CA glue.  Then, if needed, caulk around the outside of the joint to make it airtight (in case you missed a spot here and there with the CA glue).

Connecting the Hose End

Use a simple hose clamp or a Bridge Hose Clamp.

Be sure to check out the other fittings I offer: Dust Collection

If you want multiple pieces of varying sizes please reach out to me for a better deal!