6″ PVC to Dual 4″ Flex Hose – Dust Collection Adapter

Description

If you have dust collection in your shop you probably use a lot of flex hose.  Finding adapters to convert between different sizes of flex hose can be difficult, especially for a 6″ splitter!  That lead me to create this 6″ PVC to dual 4″ flex hose 3D printed adapter.

This adapter is made to convert 6″ SDR35 PVC sewer drain pipe to dual 4″ flex hose.  The adapter is printed in strong PETG and are easily connected.

Connecting the PVC End

For a non permanent connection, I recommend using foil tape.  It holds really well, is cheap and can easily be removed if you need to adjust your system.  For a permanent connection, I recommend a thick CA glue.  Then, if needed, caulk around the outside of the joint to make it airtight (in case you missed a spot here and there with the CA glue).

Connecting the Hose End

Use a simple hose clamp or a Bridge Hose Clamp.

Be sure to check out the other fittings I offer: Dust Collection

If you want multiple pieces of varying sizes please reach out to me for a better deal!